Real carbon dashboard cover, very light, nothing needs to be dismantled! Compatible with all Abarth 595 - 695 and Fiat 500 from 2016 onwards!
INSTALLATION GUIDE!
Start gluing it first from the right side, insert the edge of the dashboard under the car radio and make sure that the 3 rings (sport button etc.) are at the same height.
Instead, for the left side, where the turbo pressure gauge is, simply glue it from the front, pulling the turbo pressure gauge back so that the cover can pass through.
In the “smooth, without logo” version, you need to remove the “500” logo by levering it with a screwdriver or card, as it is a very fragile and thin plastic, it will come off easily, after which our dashboard will stick over your original one, in just 2 minutes using the double-sided tape already present on the back! This is our specialty!
All our products give a much more attractive and luxurious look to your Abarth 🦂.
They are made of REAL CARBON, of the highest quality, produced with an autoclave, therefore perfect fit, equal to the original, furthermore assembly is very simple thanks to our 3M double-sided adhesive already behind the product.
They resist all weather conditions if glued with the right care. First clean the original surface with degreaser - alcohol and then proceed with assembly.
No need to disassemble anything!
For any type of information, need or doubt, do not hesitate to contact us.
